Thermocouple type K, J or T, single or duplex with tolerance class according to IEC 60584 (EN 584).

Temperature range

0 to 600 °C

EXTERNAL SHEATH

AISI 316L seamless tube – wall thickness 1 mm
Diameter: 9 mm standard, other diameters available on request
Insertion length: standard 160, 250 and 400 mm,any other length on request.

Hint: Insertion length
For parallel thread (BSP) the length L is measured WITH the thread.
With conical threads (BSPT and NPT) the length L is measured WITHOUT the thread.

Process connection

“Standard ½”” BSP-M
Other sizes or threads available on request.”

EXTENSION OR LAGGING

Standard 145 mm, other lengths available on request

CONNECTION HEAD

Standard DIN type B head with M20 cable gland (other connection heads available on request)

The post TI-2 LP Thermocouple with extension tube – low pressure version first appeared on Thermibel.

Thermocouple type K, J or T, single or duplex with tolerance class according to IEC 60584 (EN 584).

TEMPERATURE RANGE

0 to + 600 °C

EXTERNAL SHEATH

AISI 316L seamless tube – wall thickness 2 mm
Diameter: 10 mm standard, other diameters available on request
Insertion length: standard 160, 250 and 400 mm,any other length on request.

Hint: Insertion length
For parallel thread (BSP) the length L is measured WITH the thread.
With conical threads (BSPT and NPT) the length L is measured WITHOUT the thread.

PROCESS CONNECTION

Standard ½” BSP-M
Other sizes or threads available on request.

EXTENSION OR LAGGING

Standard 145 mm, other lengths available on request

CONNECTION HEAD

Standard DIN type B head with M20 cable gland (other connection heads available on request)

The post TI-2 HP Thermocouple with extension tube – high pressure version first appeared on Thermibel.

“Thermocouple type J, K or N, single or duplex
with tolerance class according to IEC 60584 (EN 60584)”

TEMPERATURE RANGE

0 to 1100 °C

PROTECTION SHEATHS

Stainless steel (if temperature under 600 °C)
Refractory steel (AISI 310, AISI 446 or 253MA)
Diameter ½” (21,3 mm) – wall thickness 2,6 mm
Insertion length: standard 500, 710, 1000, any other length on request
Pythagoras (KER610) impervious internal sheath allows a better protection of thermocouple wires while improving the rigidity at high temperature.

PROCESS CONNECTION

Sliding flange or steel sliding connector

CONNECTION HEAD

Standard DIN type A head (other types available on request) with M20 cable gland.

The post TARP3 series – Straight thermocouple with refractory steel outer sheath and ceramic internal sheath first appeared on Thermibel.

Thermocouple type J, K or N, single or duplex with tolerance class according to IEC 584 (EN 60584)

TEMPERATURE RANGE

0 to 1100 °C

PROTECTION SHEATHS

Stainless steel (if temperature under 600 °C)
Refractory steel (AISI 310, AISI 446 or 253MA)
Diameter ½” (21,3 mm) – wall thickness 2,6 mm
Insertion length: standard 500, 710, 1000 mm, any other length on request.

PROCESS CONNECTION

Sliding flange or steel sliding connector

CONNECTION HEAD

Standard DIN type A head (other types available on request) with M20 cable gland.

The post TAR3 series – Straight thermocouple with refractory steel outer sheath first appeared on Thermibel.

“Thermocouple type K (Ni-Cr/Ni), N (Ni-Cr-Si/Ni-Si), R, (Pt-13%Rh/Pt), S (Pt-10% Rh/Pt) or B (Pt-30%Rh/Pt-6%Rh)
Single or duplex
Tolerance class according to IEC 60584 (EN 60584)”

TEMPERATURE RANGE

Thermocouple K or N : 0 to 1100 °C
Thermocouple R or S : 0 to 1550 °C
Thermocouple B : 0 to 1700 °C”

PROTECTION SHEATHS (EN 60672)

These double wall protection sheaths are offered in several combinations depending of the protection required and the temperature range.
C530 Sillimantin (external) and KER610 Pythagoras (internal) are best suited for use up to 1400 °C C530 Sillimantin (external) and C799 (Alsint) (internal) are best suited for use up to 1600 °C C799 (Alsint) both external and internal from 1600 up to 1700 °C.
In case strong corrosion issues, this combinaison may be chosen
for a lower temperature as well
Cemented in stainless steel support tube.

SUPPORT TUBE

Stainless steel or refractory steel – diameter 32 mm, length 200 mm

INSERTION LENGTH

standard 500, 710, 1000, 1400 mm, any other length on request.

PROCESS CONNECTION

Sliding flange, steel sliding connector or welded process connection (thread or flange)

CONNECTION HEAD

Standard DIN type A head (other types available on request) with M20 cable gland.

The post TAA – TSP & TPP Series – Straight thermocouple with dual ceramic protective sheath first appeared on Thermibel.

Thermocouple type K (Ni-Cr/Ni), N (Ni-Cr-Si/Ni-Si), R, (Pt-13%Rh/Pt), S (Pt-10% Rh/Pt) or B (Pt-30%Rh/Pt-6%Rh)
single or duplex with tolerance class according to IEC 60584 (EN 60584)

TEMPERATURE RANGE

Thermocouple K or N : 0 to 1100 °C
Thermocouple R or S : 0 to 1550 °C
Thermocouple B : 0 to 1700 °C

EXTERNAL SHEATH (EN60672)

KER610 (Pythagoras) up to 1400 °C
C799 (Alsint) up to 1700 °C
Diameter 10 mm
Cemented in stainless steel support tube

SUPPORT TUBE

Stainless steel, diameter 15 mm, length 80 mm
Insertion length: standard 180, 250, 355, 500 mm, any other length on request.

PROCESS CONNECTION

Sliding flange or steel sliding connector or welded process connection (either threaded of flanged)

CONNECTION HEAD

Standard DIN type B head (other types available on request) with M20 cable gland.

The post TA & TP series – small sized thermocouples with single ceramic sheath first appeared on Thermibel.

Thermocouple type K (Ni-Cr/Ni), N (Ni-Cr-Si/Ni-Si), R, (Pt-13%Rh/Pt), S (Pt-10% Rh/Pt) or B (Pt-30%Rh/Pt-6%Rh)
Single or duplex with tolerance class according to IEC 584 (EN 60584)

TEMPERATURE RANGE

Thermocouple K or N : 0 to 1100 °C
Thermocouple R or S : 0 to 1550 °C
Thermocouple B : 0 to 1700 °C”

EXTERNAL SHEATH (EN60672)

KER610 (Pythagoras) up to 1400 °C
C799 (Alsint) up to 1700 °C
Diameter 15 mm
Cemented in stainless steel support tube

SUPPORT TUBE

“Stainless steel or refractory steel,
diameter 22 mm – length 150 mm
Insertion length: standard 500, 710, 1000, 1400 mm, any other length on request.”

PROCESS CONNECTION

Sliding flange, steel sliding connector or welded process connection (thread or flange)

CONNECTION HEAD

Standard DIN type A head (other types available on request) with M20 cable gland.

The post TA & TP series – straight thermocouple with single protective sheath first appeared on Thermibel.