Thermocouple type K, N, J, T, E.
Tolerance class 1 according to IEC 60584 (EN 60584)

Temperature range

-200 to +1150 °C, depending on thermocouple type,
sheath diameter and length

External sheath

AISI 316L or Inconel 600 (other material on request) seamless
semi-flexible sheath with mineral oxide filling
Can be manufactured in very long lengths (virtually unlimited)
Can be bended with a radius equal to 3 times the sheath diameter
Totally watertight

Diameter

6 mm by default: 3 – 4,5 and 8 mm

Process connection

Standard ½”BSP-M connector
Sliding connector available in option for diameter 8 – 6 -4,5 – 3mm probes

Connection head

Standard DIN type B head with M20 cable gland (other connection heads available on request)

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with connection head first appeared on Thermibel.

“Thermocouple type K, N, J, T, E
Tolerance class 1 according to IEC 60584 (EN 60584)
Single or duplex”

Temperature range

“-200 to +1150 °C, depending on thermocouple type,
sheath diameter and length”

External sheath

“AISI 316L or Inconel 600 (other material on request) seamless semi-flexible sheath with mineral oxide filling
Can be manufactured in very long lengths (virtually unlimited)
Totally watertight throughout the length of the insert.”

Diameter

6 mm by default: 3 – 4,5 and 8 mm

Process connection

Standard type «B» ceramic terminal block Ø41 mm with 33mm screw axis spacing – Spring loaded M4 screws

Wiring

“2-wire (single) or 4-wire (double thermocouple)
Colour code IEC – ANSI available on request
Terminals are labelled + and – in all cases”

The post Sheathed thermocouple as replaceable measuring insert first appeared on Thermibel.

“Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 60584 (EN 60584)”

Temperature range

“-200 to N2981150 °C, depending on thermocouple type, sheath diameter and length”

Sheath

AISI 316L or Inconel 600 (other material available on request) seamless sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited)
Moves freely through the extension tube and the process fitting

Diameter

6 mm by default: 3 – 4,5 and 8 mm

Process connection

Standard ½”BSP-M (G ½”) connector

Connection head

Standard DIN type B head with M20 cable gland (other connection heads available on request)

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with connection head and extension tube first appeared on Thermibel.

Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 60584 (EN 60584)

TEMPERATURE RANGE

-200 to +1150 °C, depending on thermocouple type, sheath diameter and length

External sheath

AISI 316L or Inconel 600 (other material on request) seamless semi-flexible sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited).
Can be bended with a radius equal to 3 times the sheath diameter.
Totally watertight

Diameter

3 mm by default: 6 – 4,5 – 2 – 1,5 and 1 mm

Length

“300 mm by default, other lengths on request, up to several tens of meters.
Hint: make sure that the thermocouple sheath is long enough to avoid smelting of the insulation material of the connector.”

Process connection

None, but sliding connector available as an option.

Connection cable

PVC Cable with conductors 0,5mm², length 3 meter by default, other lengths and materials on request

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with fixed junction and compensating cable first appeared on Thermibel.

Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 584 (EN 60584)

Temperature range

“-200 to +1150 °C, depending on thermocouple type,
sheath diameter, and length”

External sheath

AISI 316L or Inconel 600 (other material available on request) seamless semi-flexible sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited).
Can be bended with a radius equal to 3 times the sheath diameter.
Totally watertight.

Diameter

3 mm by default: 6 – 4,5 – 2 – 1,5 and 1 mm

Length

300 mm by default, other lengths on request, up to several tens of meters.
Hint: make sure that the thermocouple sheath is long enough to prevent connector insulation material from melting.

Process connection

“None.
Sliding connector available in option.”

LEMO® Connector

LEMO® series S size 1 male (FFA) is the most common connector for sheath thermocouple Ø 3 mm and smaller.
We can also accommodate female connectors, other sizes and other number of contacts.
We can also make extension cables with mating connectors.

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with LEMO® connector first appeared on Thermibel.

Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 60584 (EN 60584)

Temperature range

-200 to +1150 °C, depending on thermocouple type, sheath diameter, and length

External sheath

AISI 316L or Inconel seamless semi-flexible sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited).
Can be bended with a radius equal to 3 times the sheath diameter.

Diameter

6 mm by default, 4,5 and 3 mm

Length

“300 mm by default, other lengths on request, up to several tens of meters.
Hint: make sure that the thermocouple sheath is long enough to avoid smelting of the insulation material of the connector.”

Process connection

“None.
Sliding connector available in option.”

JAEGER® Connector

Jaeger standard series , female 3-pin is the most common connector for sheath thermocouples.
We can accommodate male connectors, other Jaeger series and different number of contacts.
We also can provide extension cables with mating connectors.

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with JAEGER® connector first appeared on Thermibel.

Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 584 (EN 60584)

Temperature range

-200 to +1150 °C, depending on thermocouple type,sheath diameter and length.

External sheath

AISI 316L or Inconel seamless semi-flexible sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited).
Can be bended with a radius equal to 3 times the sheath diameter.
Totally watertight.

Diameter

6 mm by default: 4,5 – 3mm
Hint: make sure that the thermocouple sheath is long enough to prevent connector insulation material from melting.

Length

300 mm by default, other lengths on request, up to several tens of meters.
Hint: make sure that the thermocouple sheath is long enough to avoid smelting of the insulation material of the connector.

Process connection

None but sliding connector available in option.

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with standard connector first appeared on Thermibel.

Thermocouple type K, N, J, T, E. Tolerance class 1 according to IEC 584 (EN 60584)

Temperature range

“-200 to +1150 °C, depending on thermocouple type,
sheath diameter and length”

External sheath

“AISI 316L or Inconel seamless semi-flexible sheath with mineral oxide filling.
Can be manufactured in very long lengths (virtually unlimited).
Can be bended with a radius equal to 3 times the sheath diameter.
Totally watertight.”

Diameter

3 mm by default : 2 – 1,5 – 1 – 0,5 mm available on request
Hint: make sure that the thermocouple sheath is long enough to prevent connector insulation material from melting.

Length

“300 mm by default, other lengths on request, up to several tens of meters.
Hint: make sure that the thermocouple sheath is long enough to avoid smelting of the insulation material of the connector.”

Process connection

None, but sliding connector available in option.

Wiring

2-wire (single) or 4-wire (double thermocouple)

The post Sheathed thermocouple with mini connector first appeared on Thermibel.