Pt100 single or duplex
with tolerance class B, A or AA according to IEC 751 (EN 60751)

Temperature range

-200 to + 600 °C

External sheath

AISI 316L seamless tube – wall thickness 1 mm.
Diameter: 9 mm by default, other diameters available on request.
Insertion length: standard 160, 250 and 400mm, any other length on request.

Hint: Insertion length
For parallel thread (BSP) the length L is measured WITH the thread.
For conical threads (BSPT and NPT) the length L is measured WITHOUT the thread.

Measuring insert

Standard stainless steel Ø 6 mm
(Ø 4,5 or 8 mm available to fit other sheath diameters)
Spring loaded action.

Process connection

Standard ½” BSP-M (G ½”)
Other sizes or threads available on request.

Connection head

Standard DIN type B head (other types available on request) with M20 cable gland

Wiring

“standard ceramic terminal block – 1 x 3-wire connection.
1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request.”

The post SI6-TI Straight Pt100 probe with process connector and extension tube – with replaceable sensing element first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 751 (EN 60751)

Temperature range

-50 to + 300 °C

External sheath

AISI 316L seamless tube – wall thickness 1 mm
Diameter: 9 mm by default, other diameters available on request.
Insertion length : standard 160, 250 and 400mm – any other length on request.

Hint: Insertion length

For parallel thread (BSP) the length L is measured WITH the thread.
For conical threads (BSPT and NPT) the length L is measured WITHOUT the thread

Measuring insert

Standard stainless steel Ø 6 mm (Ø 4,5 or 8 mm available to fit other sheath diameters). Spring loaded action.

Process connection

Standard ½” BSP-M
Other sizes or threads available on request.
Also available without process connection when used with a sliding connector.

Connection head

Standard DIN type B head (other types available on request) with M20 cable gland

Wiring

Standard ceramic terminal block – 1 x 3-wire connection.
1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request.

The post SI6 Straight Pt100 probe with process connector without extension tube – with replaceable sensing element first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 60751 (EN 60751)

Temperature range

-50 to +250 °C

External sheath

AISI 316L seamless tube – wall thickness 1 mm
Diameter: 6 mm by default, other diameters available on request.
Insertion length: standard 100 mm , any other length on request.

Process connection

Standard 1″-1½” Tri-clamp® fitting
Other sizes available on request

connection head

Standard white PE head IP65 with M20 cable gland
(other types available on request).

wiring

Standard ceramic terminal block
1 x 3-wire connection (1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request)

The post SI7-CLMP Straight Pt100 probe with Tri-clamp® fitting and extension tube – sensor not replaceable first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 60751 (EN 60751)

Temperature range

-200 to + 600 °C

External sheath

AISI 316L seamless tube – wall thickness 1 mm
Diameter: 8 mm by default, other diameters available on request.
Insertion length: standard 160, 250, 400 mm,
any other length on request.

Hint: Insertion length
For cylindrical thread, the length L is measured WITH the thread.
For conical threads, the length L is measured
WITHOUT the thread

Process connection

Standard ½” BSPP-M
Other sizes or threads available on request.

Extension or lagging

Standard 145 mm, other lengths available on request

Connection head

Standard DIN type B head with M20 cable gland
(other types available on request).

Wiring

Standard ceramic terminal block 1 x 3-wire connection.
(1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request)

The post SI7-TI Straight Pt100 probe with process connector with extension tubes – sensor not replaceable first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 60751 (EN 60751)

Temperature range

-50 to + 300 °C

External sheath

AISI 316L seamless tube – wall thickness 1 mm
Diameter: 8 mm by default, other diameters available on request.
Insertion length: standard 160, 250, 400 mm, any other length on request.
Hint: Insertion length
For parallel thread (BSP) the length L is measured WITH the thread
For conical threads (BSPT and NPT) the length L is measured WITHOUT the thread.

Process connection

Standard ½” BSP-M
Other sizes or threads available on request.
Also available without process connection when used with a sliding connector

Connection head

Standard DIN type B head with M20 cable gland (other types available on request).

Wiring

Standard ceramic terminal block
1 x 3-wire connection.
(1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request)

The post SI7 Straight Pt100 probe with process connector without extension tube – sensor not replaceable first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 751 (EN 60751)

Temperature range

-100 to + 600 °C

External sheath

AISI 316L seamless tube – wall thickness 2 mm
Diameter: 11 mm by default, other diameters available on request.
Insertion length: standard 125, 250, 350, 500 mm
any other length on request.

Measuring insert

Standard stainless steel Ø 6 mm
Spring loaded action.

Process connection

Flange according to DIN 2527, EN 1092, ANSI B 16,5 – Please specify the nominal diameter (DN) and pressure rating (PN) of the flange

Connection head

“Standard DIN type B head (other types available on request)
with M20 cable gland”

Wiring

Heavy duty with severe chemical and mechanical conditions. step down shank for faster response time

The post SI8-BR – Pt100 probe with replaceable measuring insert – welded flange and extension tube first appeared on Thermibel.

Pt100 single or duplex
with tolerance class B, A or AA according to IEC 751 (EN 60751)

Temperature range

-100 to + 550 °C

External sheath

AISI 316L seamless tube – wall thickness 2 mm
Diameter: 15 mm by default, other diameters available on request.
Insertion length : standard 250, 350, 500, 710 & 1000mm, any other length on request.

Measuring insert

Standard stainless steel Ø 8 mm
Spring loaded action.

Process connection

Carbon steel sliding flange or sliding connector ¾” or 1″

Connection head

Standard DIN type B head
(other types available on request) with M20 cable gland.

Wiring

Standard ceramic terminal block – 1 x 3-wire connection.
1 x 2, 1 x 4, 2 x 2, 2 x 3-wire connection available on request.

The post SI8-BC Straight Pt100 probe for fume ducts with sliding flange and replaceable measuring insert first appeared on Thermibel.

Sheathed Pt100 single or duplex
with tolerance class B, A or AA according to IEC 751 (EN 60751)

Temperature range

-200 to + 600 °C

External sheath

AISI 316L, seamless semi-flexible sheath with mineral insulated oxide filling.
Can be manufactured in very long lengths (virtually unlimeted).
Can be bended with a radius equal to 3 times the sheath diameter.
Available diameters: 6mm by default,  3 – 4,5 and 8mm on request.

Process connection

None.
Sliding connector available in option for diameter 6 and 3 mm probes.

Connection head

Standard DIN type B head with M20 cable gland
(other types available on request).

Wiring

1 x 3-wire connection (1 x 4, 2 x 2, 2 x 3-wire connection available on request, depending on the sheath diameter)

The post Series SC-TB screw-in probes with sheathed, non-replaceable sensing element and connection head first appeared on Thermibel.

Pt100 single or duplex With tolerance class B, A or AA according to IEC 60751 (EN 60751)

Temperature range

Standard -200 to 600°C.

External sheath

AISI 304L seamless semi-flexible sheath with mineral oxide filling. Diameter: 6mm by default, 4,5 and 3mm available on request

Wiring

1×3 wire connection (1×4, 2×2, 2×3-wire connection available on request, depending on the sheath diameter)

The post SC sheathed measuring insert first appeared on Thermibel.

“Pt100 single or duplex element. Pt1000 element available on request.
Tolerance class B, A or AA according to IEC 751 (EN 60751).
Protective shield: stainless steel.
Diameter: standard 6 mm (4.5 and 8 mm also available)
Insertion length: Standard DIN lengths and any length in 5 mm increment.”

Temperature range

Standard -200 to 600°C.

Head connection

According to DIN43762 – M4 screws 33 mm spaced
Spring loaded mechanism for better contact with the bottom of thermowell or absorption of vibrations.

Electrical connections

“Standard ceramic terminal block 1×3-wire 1×2, 1×4, 2×2, 2×3-wire connection available on request”

The post Measuring element (SI9) first appeared on Thermibel.